TECHNICAL INFORMATION
Color: Clear and colorless
Appearance: Gel
Base: Ethyl cyanoacrylate
Odor: Sharp, irritating (use in a well-ventilated area)
Specific Gravity: 1.05
Flash Point: 176 to 199°F (80 to 93°C)
VOC Content: < 2 % by weight CARB < 20 g/l SCAQMD rule 1168
Shelf Life: 18 months from date of manufacture (unopened)
Lot Code Format: YYMMDDXX
Printed on back of blister card YY = Last two digits of year of manufacture
MM = Month of manufacture DD = Day of manufacture
XX = Disregard
For example: 15112303 = Product was manufactured November 23, 2015
Application Temperature: Apply above 50°F (10°C)
Fixture Time: 15 to 30 seconds*
Handling Time: Leave undisturbed for at least 5 minutes. For best results, allow full bond strength to develop overnight before handling.
Cure Time: 12 to 24 hours. Times are dependent on temperature, humidity, porosity of surface-bonded and amount of adhesive used.
Cured Form: Non-flammable, brittle solid
Service Temperature: -40°F to 248°F (-40°C to 120°C)
Moisture Resistant: Yes
Chemical Resistance: Motor oil, unleaded gasoline, ethanol and isopropanol
Appearance: Gel
Base: Ethyl cyanoacrylate
Odor: Sharp, irritating (use in a well-ventilated area)
Specific Gravity: 1.05
Flash Point: 176 to 199°F (80 to 93°C)
VOC Content: < 2 % by weight CARB < 20 g/l SCAQMD rule 1168
Shelf Life: 18 months from date of manufacture (unopened)
Lot Code Format: YYMMDDXX
Printed on back of blister card YY = Last two digits of year of manufacture
MM = Month of manufacture DD = Day of manufacture
XX = Disregard
For example: 15112303 = Product was manufactured November 23, 2015
Application Temperature: Apply above 50°F (10°C)
Fixture Time: 15 to 30 seconds*
Handling Time: Leave undisturbed for at least 5 minutes. For best results, allow full bond strength to develop overnight before handling.
Cure Time: 12 to 24 hours. Times are dependent on temperature, humidity, porosity of surface-bonded and amount of adhesive used.
Cured Form: Non-flammable, brittle solid
Service Temperature: -40°F to 248°F (-40°C to 120°C)
Moisture Resistant: Yes
Chemical Resistance: Motor oil, unleaded gasoline, ethanol and isopropanol
Summary
If you are looking for a glue that is small and compact, this may be just what you need. The Loctite Super Glue Gel comes in a handy pen applicator that contains four grams of glue. It is incredibly easy and convenient to apply, especially in hard-to-reach places. If you need to bond something in tight corners, nooks, and crannies, you might want to consider using this.
This adhesive is particularly great for those who have weaker hands. You do not have to squeeze very hard just to get the glue out. Extra applicators, containers, or other tools are also not required. Another bonus is that you do not need to clamp the pieces together for the glue to hold. It will set and dry at a fast rate.
Aside from all the benefits mentioned, the pen container also makes for precise and accurate application. As for the downsides, the only notable one is that it does not dry clear. The glue will leave a white stain after it dries. You may have to paint over it to cover the residue.
FAQ
Can I store this or do I have to use it all at once?
As long as you seal the applicator tightly, the glue should not dry out or harden. You can keep it in storage for several weeks or months before using it again.
Does this glue dry clear?
No, it does not. The residue may be a milky white color.
How long does it take to bond?
The glue will bond almost instantly. You do not have to do any clamping.
SaleBestseller No. 1
Gorilla Super Glue Gel XL, 25 Gram, Clear, (Pack of 1)
- GEL FORMULA: No run control...
- ANTI CLOG CAP: Helps keep the...
Bestseller No. 2
Loctite Super Glue Ultra Gel Control, 0.14 fl oz, Bottle
- Rubber Toughened: Loctite’s...
- No Drip or Run: No-mess...
Bestseller No. 3
Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe...
- Easy-to-use self-mixing...
- High-strength formula bonds...
Paid Links / Last update on 2022-08-20
You Can Find the Best Loctite Products in Our Tops
Video Review
Contents