Automotive Amazing Goop: Specs, Drying Time, Instruction & Uses

Automotive Amazing Goop




Cure time





  • Flexible
  • Chemical resistant
  • Abrasion-resistant
  • Waterproof
  • Paintable


  • Difficult to remove from some surfaces


Standards: ASTM D-412, ASTM D-149Size: 3.7 oz.
Container Type – Adhesives: TubeAdhesive Color: Clear
VOC Content: 475gType: adhesive
Begins to Harden – Adhesives: 4 to 20 min.Full Cure Time – Adhesives: 1 to 3 days
Begins to Harden: 2 min.Color: clear
Chemical Base: Solvent BaseViscosity: 100,000 cps
Temp. Range: 60 Degrees to 85 Degrees FContainer Size – Adhesives: 3.70 oz.
Application Temp. Range: 50 Degrees to 90 Degrees FItem: All-Purpose Adhesive
Application Family: General PurposeApplication: Repair, Seal and Stick to Garden Tools, Glass, Plastic, Metal, Leather, Vinyl, Rubber, Brick, Marble, Copper, Brass, Wood, Porcelain, Ceramic
Materials Bonded: Asphalt, Concrete, Fiberglass, Leather, Masonry, Metal, Plastic, Rubber, WoodTensile Strength: 3800 psi
Curing Time: 24 to 72 hr.Country of Origin (subject to change): United States

Automotive Amazing Goop technical data sheet and instructions are here.

You Can Find Automotive Amazing Goop in Our Tops

Use cars in and around to prevent tears in floor mats, vinyl chairs, and tops. AMAZING GOOP AUTOMOTIVE may coat terminals.

Characteristics and Advantages

FLEXIBLE — doesn’t become brittle in cold weather.
CHEMICAL RESISTANT — secure dilute caustics and for software subjected to dilute acids.
ABRASION RESISTANT items subject to wear.
WATERPROOF — may be submerged in salt and freshwater after treatment.

Beautiful GOOP Automotive will fix, seal and sticks into a variety of materials. Its flexibility makes it perfect for all types of needs: from fixing upholstery to attaching cut, everything! Bonds to a variety of materials, such as leather, glass, vinyl, and metal.


Amazing GOOP Automotive Adhesive much more than glue, it repairs bikes, automobiles and trucks!
Bonds to metal, glass, plastic, vinyl, and leather.
Seals convertible tops.
Fixes chairs lights, mats, mirrors, handles, trim.
Withstands heat up to 150° F.
Paintable once treated.
Dries clear.
Doesn’t slip and slide before it’s set.


How long does Amazing GOOP Automotive take to dry?

A full cure takes 24 to 72 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases. To speed drying time, apply heat using a handheld dryer set on low. Hold dryer at least 6 inches from the surface.

How can Amazing GOOP Automotive be cleaned up?

Small amounts of acetone or citrus-based solvents may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is Amazing GOOP Automotive water-resistant?

Yes. Amazing GOOP Automotive is water resistant immediately upon application. Apply Amazing GOOP Automotive directly to the surface to be sealed. Use thin coats of Amazing GOOP Automotive to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces, such as plastic, glass, or ceramic. Amazing GOOP Automotive hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.

What temperature range does Amazing GOOP Automotive withstand?

Amazing GOOP Automotive is best when applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). (Note: Amazing GOOP Automotive can be applied outside this temperature range, but cure time may increase significantly.) Once cured, Amazing GOOP Automotive can withstand temperatures between -40 °F and 150 °F (-40 °C to 66 °C).