What is the strongest glue for metal? The most common answer is: epoxy. Let’s figure it out.
Having a metal part break might be very frustrating. Such parts are usually not cheap, and a regular basic glue will not do the job properly. Having in mind that most of us are not holding welding tools, and are not experienced in soldering work, metal glue can come very handy! It doesn’t matter if it’s for big parts or delicate jewelry work, metal glue can do the trick for strong and lost lasting bond between 2 metal parts or even metal to glass, plastic, or wood. There are plenty of metal glues out there and choosing the right one isn’t always easy. This checmicalwiki article is here to provide you with all the relevant information so you can decide what is the best metal glue for you needs.
What are the different types of metal glues?
When it comes to metal glue, there are 3 types of families:
The Epoxy, The Super glue and the Polyurethane.
The Epoxy glue is the convenient alternative to welding and is best used for metal to metal bonding. Epoxy adhesive is the strongest solution for bonding most metals, including iron, steel, aluminum, brass, copper, and pewter. Its strength is due to its two main components: resin and hardener. The 2 components are usually separated and there is a need to mix them together. The ration between those components is crucial for getting good results, therefore take extra care to the instructions provided by the manufacturer. Once mixed, the glue needs to be applied quickly on the required surface. Attach the part tightly for couple of seconds but remember that the epoxy glue is very strong so there is no option for later correction- try to be accurate as much as possible. There is no problem in painting over the dried glue, or even sand it down a bit for better look.
The Super Glue is a cyanoacrylate-based sealant which can be used to bond metal to metal or metal to plastic or wood. It is easy to use and usually mess-free. Most people choose Super glue for delicate works- it comes in easy to use dispenser which allows you to bond accurately small pieces. Nevertheless, have in mind that super glue is not as ling lasting as epoxy and is unable to withstand high pressure.
The Polyurethane glue is the less popular glue for metal work. It is also known as thermosetting polymer since it requires some heat in order to work- in most cases room temperature would suffice. There is no need to mix any components or make other preparations. The Polyurethane is not as strong as the epoxy, but on the other hand, even when it dries it is still not 100% stiff which means you can still make some corrections in case the bonding was not accurate enough. In addition, there is no problem in painting or sanding it down once dried, after 24 hours.
This kind of glue can perfectly resist high moisture conditions and is totally waterproof therefore perfect for outdoor projects. But due to its short shelf life (about 1 year) and the fact that it is not as strong as the epoxy glues, the Polyurethane wouldn’t be our first choice for other than outdoor projects.
Best Glue for Metal Buyer’s Guide
It’s believed that metal glues could replace soldering and welding in some applications. This is because the technology implemented in today’s metal glues and epoxies enables joining two metal objects or metal objects to other surfaces quickly, safely and efficiently. The bonds are tight and are becoming increasingly more resistant to temperature and harsh environmental changes.
How is this even possible?
Polymerization of single component adhesives, such as urethane, requires moisture on the surface or in the atmosphere to make the bond. During the curing process, carbon dioxide is released. However, an environment that is too moist can cause foaming. That’s why such glue may say it’s best to not use it in humid environments.
Metal to Metal Glue
While metal-on-metal gluing has come a long way with these technologies, new technologies have emerged.
Think about how hard it is to rub the bristles of two brushes together. In fact, you may not be able to move them at all because they interlace. On the molecular level, the bonding of new glues uses this kind of bristle interlacing. In this case, the role of the bristles is performed by nanorods.
Nanorods can’t be seen with the naked eye, but if you place the glue on two surfaces and press them together, the nanorods will connect and allow the metal to stick to metal. This is like soldering without heat and hazards. A nanorod bond can withstand heat and reach bond strength of up to 1,500 psi, which is greater than some solders.
Best Glues for Metal 2020
Paid Links / Last update on 2021-10-03
When you have the right glue, the bond is nearly instant with strong and reliable adhesive. This level of performance saves time and spares you a lot of frustration. The wrong glue for the job may take too long to set or not hold for long. Glue failure can lead to safety issues and incomplete projects. This isn’t ideal for metal workers, mechanics, jewelers, construction workers, and manufacturing facilities that rely heavily on gluing metal to metal.
Glued parts falling apart can be very annoying for homeowners doing home improvement projects or crafters working on creating something special.
Fortunately, the right glue is out there. In fact, there are many varieties vying to be the best glue for metal and we have tested them so you can choose the one that is best for you.
If you are confused about which glue to buy, read on to find the best glues for metal.
1. Editor’s Choice Glue for Metal: J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy
- J-B Weld KwikWeld: A fast...
- Cure and Set Time: After...
Paid Links / Last update on 2021-10-03
When looking for the best glue for metal, J-B Weld brand comes up quite often. Their glue comes in basic packaging with the claim “World’s Strongest Bond” printed at the top. This quick setting steel reinforced epoxy comes as a two-component set and is the faster curing version of the original cold weld two-part epoxy.
This epoxy sets in as little as 6 minutes and takes 4 to 6 hours to cure, so it can’t be touched during this time if you want the bond to be as strong as possible.
Permanent Bonding
Once the glue cures, the bond is permanent. This means that you can sand it, drill it, fill it, or do whatever you need. This is a bond with a tensile strength of 2424 PSI, which is a very strong bond. It’s easy to use, works on multiple surfaces, and maintains performance at temperatures up to 300 degrees Fahrenheit. Those that benefit the most from this glue are homeowners doing household repairs, plumbers, mariners, crafters, auto mechanics, and many others.
This glue is our pick because of its tensile strength, quick bonding time, the range of applications, and convenience.
- Excellent tensile strength
- 6-minute bonding time
- High-temperature tolerance to 300 degrees Fahrenheit
- A wide range of applications
- Easy-to-use
- Workability
- The curing time requires some patience
Video Guide
2. E6000 231020 Craft Adhesive
Paid Links / Last update on 2022-08-20
Tack time: ~ 4 minutes
Set time: 20 minutes*
Full cure time: Thin film: 24 hours / Thick film: 48-72 hours
Shelf life: 2 years (unopened)
*Depending on material, humidity and temperature
The E6000 packaging means business, as it gives you a lot of information when you look at it. This is an industrial-strength adhesive that forms a permanent bond. It comes as a single tube, so there are no mixing compounds to get gluing.
Perfect For Crafters
When it fully dries this glue becomes transparent. The fact, that this glue isn’t going to give you an instant bond, is perfect for crafters who need to make adjustments to the workpieces. You have about 5 minutes before the glue sets. For crafters looking for a fast-curing adhesive, this glue is not going to work because it takes from 24 to 72 hours to fully harden. If you are fine with putting the project down for a few days, the curing time should not be an issue for you.
The ease of use is another reason why this metal glue might be just perfect for you. The adhesive being in one tube makes it easy to apply with one hand in one step. Some users will find the built-in applicator tip an additional convenience.
Glue Anything You Want
E6000 230732 Craft Adhesive can glue fabric, wood, glass, ceramic, metal, and a wide variety of materials. You can also meet E6000 Craft Adhesive in our Best Glue For Glass top. The glue performs well in high temperatures and extreme conditions, including water. The excess can be easily wiped away and, once dry, it leaves a clear coat that you can paint on so that it isn’t obvious the glue was used in the project.
This glue is our choice for crafts because it can handle many conditions, can bond many materials together, and allows crafters to easily clean up.
- Bonds more than just metal
- Waterproof
- Transparent
- Non-flammable
- Resists high temperatures
- Safe to use in a washer or dryer
- Ideal for craft projects because excess is easily wiped away and the cured glue is paintable
- Photo safe
- Curing time can take up to 72 hours
3. Loctite Liquid Professional – Super Glue For Metal
Paid Links / Last update on 2022-08-20
Set time: 5 to 45 sec.
Cure time: 12-24 hours
Shelf life: 21 months (unopened)
Operating temperature: up to 180ºF
You wouldn’t think that super glue would be a type of glue that would bond metal, but Loctite Liquid Professional Super Glue does. When you need to make repairs or complete heavy-duty projects, this is the first choice. This glue comes in attractive packaging containing a bottle that is easy to squeeze making your work convenient and quick.
That this is a very fast drying glue it says on the box. This means that working with this glue, you have to be precise in joining the parts as this glue will not give you any time for adjustments.
Universal Tool
Despite being a good metal glue it also works with ceramic, paper, rubber, plastic, and wood. Jewelers, photographers, auto mechanics, and others can use this glue to repair jewelry, car parts, furniture, toys, cameras, vases, and practically anything you can think of. You could even repair that tear in your favorite pair of pants or glue that zipper back into place.
We recommend the Loctite glue because it allows a person to handle a large project and complete it in a short time. Also, the pin cap will not clog, which is an issue many people have with super glues.
- The bottle is easy to use, and the pin cap won’t clog
- If you have a need for speed, the glue dries in seconds
- You can repair practically anything
- There is no time to make adjustments if a fitting error is made
4. Amazing Goop 160012 – Best Automotive Adhesive For Metal
- Repairs vinyl tears on car...
- Maintains its powerful bond to...
Paid Links / Last update on 2020-12-09
Tack time: ~ 2 minutes
Set time: 45 minutes*
Full cure time: Thin film: 24 hours / Thick film: 48-72 hours
Shelf life: 2 years (unopened)
Operating temperature: from -40 to 180ºF
*Depending on material, humidity and temperature
The Amazing Goop Automotive Adhesive package looks like a lot of fun with its cartoonish font and red and gray colors. However, the text on the package shows it means business. Auto mechanics will appreciate this adhesive because of its metal-on-metal bonding capabilities, as well as the flexibility in its use.
The bonding capabilities are so good that you might never be able to completely remove it from rough surfaces. It also contains distillates, which means it could dissolve paint or other coatings it is applied to. However, since it has no applicator, you may have to get creative in how to apply it.
Weather Resistant
Nonetheless, practically anyone in the automotive industry can use this glue because its range of applications includes repairing torn vinyl car seats and floor mats. Since it is waterproof and resists sun damage, it can also work for convertible tops and reattachment of side molding and emblems. If any items in a car rattle, the adhesion is strong enough to stop the vibration.
Under the hood, auto mechanics can seal leaking hoses, as well as use it as an insulator for electrical wiring or to protect battery terminals.
This glue is popular for its versatility. It has applications that solve problems inside and outside of any motor vehicle.
- Flexibility and versatility
- Applications inside and out of the vehicle
- Works as a sealant and insulator
- Waterproof
- No applicator
- Might dissolve coatings, paints, etc.
- Difficult to remove from some surfaces
5. Best Jewelry Glue: Aleene’s Jewelry & Metal Glue
- Aleene's jewelry and metal...
- Bonds quickly and gel formula...
Paid Links / Last update on 2022-08-20
Jewelers get a lot of respect for the precision with which they have to handle the tiny parts they deal with. Some pieces of jewelry seem almost impossible to repair. However, good jewelry glue can make all the difference. Aleene’s Jewelry & Metal Glue will make the repair of small stones and beads possible. The glue also works well with the different metals.
This is a glue that dries so fast that there is no room for error. It sets almost instantly, which has its pros and cons. On the one hand, the job is done fast. On the other, the parts being glued must be placed precisely on the first try or adjusted quickly. This kind of precision takes the talent only jewelers possess.
This glue dries clear and strong for a permanent hold. It’s easy to apply so making an error is less likely.
This glue receives the designation as the best jewelry glue for its strong adhesion, fast-drying time, and leaving no traces.
- A permanent bond
- Facilitates speedy jewelry repairs
- Simplifies the jewelry repair process
- Fast-drying for people who prefer it
- Small applicator tip
- Transparent
- Dries almost instantly, leaving little time to make adjustments after the glue is applied
6. Best Metal to Glass Glue: Beacon Glass, Metal & More Premium Permanent Glue
- Water and Weather proof
- Dries Clear
Paid Links / Last update on 2020-12-09
Sometimes, it’s necessary to bond metal to glass and vice versa. Looking at the Beacon Glass Metal & More Premium Permanent Glue’s packaging, it’s like you’re looking at a product that has been around for a century or more. The vintage look is comforting and instills trust and deservedly so, as this product that can aid in the repair of practically anything.
Just don’t use the glue near a flame because the vapor is flammable. The vapor is also harmful, so you must use it in a well-ventilated area.
Once you find a safe place to use the glue, you’ll notice it grabs on very fast. Furthermore, the glue has more applications besides bonding metal to glass. You may use it to create mosaics, repair jewelry, and much more. This is a fast-drying glue, which facilitates completing the job quickly, and it becomes so clear when dry that it is practically invisible.
This glue stands out as the best metal to glass glue because it succeeds in this application where some super glues fail. The drying time is fast, the bond is very strong and any traces are practically invisible.
- Best for bonding metal and glass
- Fast drying
- Suitable for other materials
- Dries clear
- Vapors are flammable
- Vapors are dangerous in a poorly-ventilated space
7. Strongest Glue for Metal: Technicqll Very Strong Epoxy Adhesive Glue for Metals
- 1 x EPOXY ADHESIVE GLUE FOR...
- Two component adhesive for...
Paid Links / Last update on 2022-08-20
Full cure time: 24 hours
Shelf life: 2 years (unopened)
Operating temperature: from -86 to 194ºF
*Depending on material, humidity and temperature
As you probably already know, epoxies are very strong. Most are two-component adhesives that, when mixed, create a bond that is virtually unbreakable. Technicqll Very Strong Epoxy Adhesive Glue is a good example of this, as it has been called “liquid metal” because of its tight grip. Just like with any epoxy glue, before application, the surface you’re working with needs to be thoroughly cleaned and degreased to ensure the best possible bond and two components need to be mixed in equal proportions.
The epoxy can handle temperatures as low as -86 degrees Fahrenheit and as high as 158 degrees Fahrenheit. The adhesive works on alloys, cast iron, concrete, steel, brass, bronze, aluminum, and other metal types. It will even bond to plastic and stone so that it can aid in the completion of projects that involve multiple materials.
The bond is resistant to acids, oil, and gasoline. In other words, it is ideal for harsh environments.
The glue takes initially 90 minutes to set and fully cures in approximately three hours.
Pro tip: use a blowdryer to greatly reduce the curing time!
Once dry, epoxy leaves a metallic gray trace. The bond is extraordinarily strong in our experience.
- Behaves like “liquid metal” due to its strength
- Will hold together multiple materials, including many types of metals
- Cures very fast
- Resistant to cold and hot temperatures
- Resistant to oils and acids
- Surfaces require extensive preparation
8. Best Waterproof Glue for Metal: Elmer’s E7502 Advanced ProBond
- 4 ounce bottle of...
- Bonds metal, glass, ceramics,...
Paid Links / Last update on 2020-12-09
Full cure time: 24 hours
Shelf life: 2 years (unopened)
Operating temperature: up to 180ºF
When you see Elmer’s name, you probably think about the glue you used in school. Well, Elmer’s does much more than creating white paste and glue sticks used in art classes; the company creates professional-strength glue that is waterproof. It’s Advanced ProBond stands up to all types of weather and can bond metal, unlike its little brothers and sisters hanging out in art boxes around the world.
Also, unlike school glue, this glue is runnier. It’s important to be prepared for the glue to come out fast, otherwise, it’s easy to squeeze out too much.
Fortunately, E7502 Advanced ProBond can be quickly cleaned up with water. It’s non-toxic, despite its ability to bond metal, concrete, stone, wood, and many other material types. When the glue dries, it is translucent and can be painted over really easily.
Overall, this is a simple glue that gets the job done. It’s nice that a name we know from our school days has entered the world of multi-surface professional adhesives.
- Fast-drying
- Dries clear
- Paintable
- Multi-surface
- It flows very fast, which can catch you off guard
9. Epoxy Resin by Yanyi – 5 Minute Kwick-Set
- ✔5 minutes working time, 24...
- ✔High-strength bonding,...
Paid Links / Last update on 2022-08-20
Set time: 3-5 minutes
Full cure time: 24 hours
Operating temperature: up to 350ºF
This is a two-part adhesive, but it mixes while being dispensed from the dual-nozzle bottle, which eliminates the need to manually mix the components. This alone saves time and ensures the mix is prepared properly.
However, this is a glue that is best dispensed in small quantities, so it’s going to take more glue for large projects.
Nonetheless, this epoxy is effective for joining, attaching, and even sealing. The bond is permanent and holds up well against impact and vibration because it expands and contracts with temperature changes. If applied at room temperature, the glued object or objects can already be handled in about 5 minutes.
This glue will work if you need to glue together items made of multiple materials. Its wide range of applications includes automotive, electrical, construction, and general industrial. Once applied, you have five minutes to make adjustments. The epoxy completely cures in 48 hours.
All in all, this epoxy works well for construction projects because of its ability to bond metal to metal and metal to dissimilar surfaces. It’s strong and reaches handling strength within 20 minutes.
- Versatile and flexible
- Bonds metal to dissimilar surfaces
- Reaches handling strength in 20 minutes
- Ideal for smaller projects, although more glue can be used for larger projects
FAQ
1. How to bond metal to metal without welding?
Another option for gluing metal is epoxy. A convenient alternative to welding, it’s the strongest solution for bonding most metals, including iron, steel, aluminum, brass, copper, and pewter.
To apply epoxy on metal you have to first fill a paint sprayer with primer. Use an etching primer on bare metal or a bonding primer on previously painted metal. Keep the spray gun about 1 foot from the surface, and use quick, spreading movements to spray a primer coat. And, Enable the primer to dry out for the manufacturer’s prescribed period of time.
2. What kind of glue works on metal?
Epoxies, polyurethane and cyanoacrylate-based sealants will all function well enough for metal-to – metal gluing, but an epoxy is possibly the most robust option if you are looking for a solid, weather-resistant option. Many epoxy materials require you to combine equivalent adhesive and hardener pieces and add the mixed material with a suitable tool to the surfaces to which you are trying to adhere.
3. What is the strongest glue for metal?
Loctite Epoxy Metal / Concrete, a two-part system consisting of a polymer matrix and a hardener, is the best epoxy for metal. To produce a strong, high-strength bond that dries in minutes and can be used to patch, fill and restore both metal and cement surfaces, the adhesive and the hardener should be carefully mixed.
4. What is the best glue for plastic to metal?
It’s crucial to know what forms of adhesives can complete the task prior to actually attempting to glue metal to plastic. Not all adhesives are the same, for example, wood glue and school glue are designed for porous materials and it would not work well on either metal or plastic. Some glues designed for plastics do not fit well on metals, and vice versa.
5. How to remove glue from metal?
First you can try using rubbing alcohol, or isopropyl, to extract adhesive residue from metal. Apply with a ball of cotton and allow to soak in. On contact most adhesives break down and rubbing alcohol does not affect metal surfaces. If that fails, then baby oil is a good substitute. You may also use any acetone but seek to deal with denatured alcohol, lighter fluid, or hydrogen peroxide for a stronger option to acetone. Apply with a cloth or cotton ball, keep the glue to melt, then wash it off.
Choosing the Right Glue for Metal
Now that you know a little about the technology, the question is how you know which glue for metal is right for you and your project?
Bond Time
Waterproof? Sun Resistant?
Second, think about the environment your project will be exposed to. Will the temperatures get very high, such as under the hood of a car? Are you planning to use it in cold weather? Will the rain be an issue, resulting in the need for a waterproof adhesive? The answers to these questions will help you narrow down the options.
Bottle Size
What Else?
Fourth, consider the user-friendliness of the glue. There are some glues out there that aren’t convenient or easy to use at all, especially when it comes to manually mix two-component adhesives. Others have bottles that aren’t easy to operate with one hand, especially when lacking a good applicator.
It’s good to consider everything that’s important to you in a metal glue so that the finished product is durable and of good quality.
Very helpful. However, I am trying to ‘fix’ a metal castor end into a wood leg of a beechwood butcher’ s kitchen trolley. This involves metal to wood. Glues are so, so many. Would appreciate any help – is gorilla wood-glue any good ?. Thanks
For metal- to-wood I’ll recommend any epoxy glue. JB Weld will work for sure!
Hi, I have read your review and find it really interesting but am still struggling to make a decision. I want to fix tonic bottle tops to a cork tile and then fit that tile to line a roof over a deck in the garden. It will be dry but potentially exposed to cold temperatures. I wanted to do it this way as it will be easier to work flat on a table and then attach the tile to the structure. The intention is to be decorative.
In your case, I’ll recommend Amazing Goop glue!
Great info! I think I know the answer to my question, but the only dumb question is the one you don’t ask. I want to adhere black iron pipe (degreased) to a cedar, oak, or treated pine seat. There will be 4 quarter sized contact points between the 4 angled iron legs and the seat. The results will reside in WI so it will need to handle temps from -15 & 100. It also needs to be waterproof.
JB Weld is my best option, right?
I hope you have rigid bracing between the legs. Otherwise, a quarter-sized contact point between a leg and the wood is likely too small to handle the torque from the leg, not only for any glue but even for screws. Wood may delaminate, even if the glue holds. So make sure the legs are braced rigidly (perhaps welded into a frame?) and see if you can find ways to increase the contact area. In any case, please do not take this as an engineering consultation, this is just our opinion based on very limited information. So rely on your own judgment and experimentation. Happy DIYing! 😉
My project is very small. One screw has stripped on an osculating saw. I’m not sure that Locktight would be strong enough but the size of the bottle is good. I think JB Weld would work but think its way to much (size). I only need a drop or two. Only one stripped screw that holds a safety cover over the blade. Your thoughts?
I think in your case it’s better to use JB Weld or any epoxy. It has a 1-year shelf life (and you can extend it by keeping glue in a fridge). Sometimes it’s great to have epoxy on hand.
I am looking for a waterproof adhesive for a large, outdoor project gluing mosaic tile to metal in a climate that ranges from -30 to 100 degrees. I would like something in bulk that is safe and easy for volunteers to handle.
thanks for your thoughts!
Liquid nail, epoxy, PVC glue. Those are my ideas.
I think TotalBoat Crystal Clear Epoxy Kit will be ideal for your big project.
Though very informative , I could not decide to use which product for sticking metal to glass.I have to stick four metal (brass) bodies in round shape to a glass sheet. Four on the left side and another four on the right side of glass sheet of 6′ * 4′ size. Each metal piece weighs 1.25 kilo gram. Will you please advise me to which glue I had to use.
Thanks & regards,
C.SAMBA SIVA REDDY
I think you should try JB Weld Epoxy for metal to glass: https://amzn.to/3fnBi93
i would like to know we can use it for meddle signs like no parking signs???..
Hello! Can you provide more details?
I need to join brass to brass, but the contact area is tiny.
The brass bezel around my glass clock face has a small flat brass tab attached at 90 degrees to the edge of the bezel which, when the door is closed, enters a vertical slot in the clock case to engage in a simple lock. The tab has fallen off. The contact area of the bond between tab and bezel measures 10mm x 1.5mm! The tab receives a bending force- from a spring – that will stress the bond in the narrow direction during the locking action, once per week.
I have managed to file tiny dovetails into the bezel edge to locate the tab and roughened the surfaces with wet and dry before using Evo-stik Rapid, but it fell apart after a few weeks use.
What would you suggest?
Thanks
David
PS – I can see evidence of solder in the broken bond. This was probably carried out by the manufacturer before the glass was fitted. The glass cannot be removed now without risking significant damage to the bezel, and glass!
I am sorry, but the kind of consultation you are looking for is beyond our competence and comprehension.
In your case, it’s better to find a replacement part. Also, you can try jewelry glue.
Nice work! I’ll bookmark this for future reference.
My repair job is a small hair ornament made of brass. It fell out of my hair and the decorative part broke away from the hair-comb part at two points of the metal. Which of your recommended products do you think would be the most effective and permanent? Dry time doesn’t matter.
Thanks!
DH
Try this one: https://chemicalwiki.com/best-glue-for-metal-guide/#5_Best_Jewelry_Glue_Aleene8217s_Jewelry_Metal_Glue
I am a mixed media artist and need to re-attach a strong handmade paper circle to the lid of a 4″ round tin (not painted) box (I have forgotten what I used originally 9 years ago, but it popped off after about 5 years). I also have some small cork pieces which were originally sticky backed, but are now popping off the sides of this same metal tin box. What adhesive do you suggest that will hold for a long time? It needs to set without adding thickness.
Thanks for any help.
In your case, I’d tried some super glue: https://chemicalwiki.com/best-glue-for-metal-guide/#3_Loctite_Liquid_Professional_8211_Super_Glue_For_Metal
Terrific information: Thorough, clear, and helpful, thank you. May I ask your advice: I would like to permanently re-join the “neck” of my pocketwatch, the part that houses the winding stem and on top of which sits the watch’s winding crown, to the watch case itself. Attached to the “neck” is the bow (i.e. “ring”), to which the watch chain is attached. Consequently, the neck will need to withstand being pulled by the chain from a pocket, the weight of the watch, and the frequent “yank” of the crown for setting and then the crown being pushed back for winding. The joint is small, and no compound should migrate as that could potentially “lock” the winding stem or reach the watch movement (motor). I thought perhaps red Loctite, or possibly JB Weld Epoxy, because of tensile strength. Thank you in advance for any advice you might be comfortable to share (and happy new year).
I have framed sheet metal to hang up for magnetic displays to attach to. I would like to glue sand onto it for an ocean theme. Not to thick, so magnets will still adhere. What glue will hold a thin yet full coat of decorative sand to sheet metal?
have a question and it is about fixing disney pins.alot of people use some sort of super glue to fix a loose or wobbly post on the back of a disney pin.Between gorilla glue,e60000,jb weld would you say any would work better than the other as a permanent fix?Also which would make the smallest mess and would using a toothpick work?