With advances in chemical technology, there are glues and adhesives that are much more powerful than just a few years ago. In fact, the choice is so bewildering, it may be difficult to make an intelligent selection that perfectly suits your needs. There is no such thing as one size fits all when it comes to glue even if a product is labeled as multipurpose. If you are working with rubber, you will find several industrial or commercial types of glue for rubber, but choosing the right one requires knowledge about stress resistance, durability, and safety.
- Best Glue For Rubber 2019
- 1. 3M 08008 Black Super Weatherstrip Adhesive Tube – Best for Waterproof Sealing in Your Car
- 2. Boot-Fix Shoe Glue: Instant Professional Grade Shoe Repair Glue – Specifically Formulated for the Shoe Repair Industry
- 3. Gorilla Super Glue Gel, 15 g – Super Strong for a Variety of Surfaces
- 4. GlueMasters Instant Glue – Industrial-strength Glue for the Consumer Market
- 5. GOAT TUFF HIGH-PERFORMANCE GLUE – Premium Archery Glue
- 6. Gear Aid Freesole Urethane Formula – To Extend the Life of Your Footwear
- 7. Starbond KBL-500 – Industrial Grade Bonding and Filling Adhesive
- 8. Hero Glue – Extra Strong and Fast Bonding it Is Useful for a Wide Variety of Materials
- 9. Bob Smith Industries BSI-117H Black IC-2000 – Extra Strong Rubber Toughened Super Glue
- 10. Starbond KBL-50 Flexible Black Thin – A Premium Super Glue Expands and Contracts With the Environment Preventing Cracking
Best Glue For Rubber 2019
There are several different types of rubber, including natural rubber for hoses, conveyor belts, footwear, drive couplings and tires, neoprene for electrical insulation, O-rings, orthopedic braces, diaphragms and automotive fan belts, nitrile elastomers for fuel lines, transmission belts, water pump seals, cable jacketing and hydraulic hoses and Santoprene for knobs and controls, bushings, pump gaskets steering column covers and much more. Rubber adhesives are used in the medical, automotive, aerospace, oil and chemical, optical and electronic industries. Here you will find a top 10 selection of the best glues for rubber where you are sure to find one that fits your requirements.
|3M 08008 Black Super||Rubber, fabrics, |
|Oil and |
|Boot-Fix Shoe Glue||All rubber and |
|Gorilla Super Glue||Plastic, wood, |
|GlueMasters Instant||Rubber, glass, |
|GOAT TUFF||Plastic, rubber, |
|Gear Aid Freesole||All types of footwear||Yes||$8.98|
|Starbond KBL-500||Wood, Metal, |
|Hero Glue Premium||Metal, wood, |
|Bob Smith Industries||Hard plastics, |
|Starbond KBL-50||Wood, metal, |
1. 3M 08008 Black Super Weatherstrip Adhesive Tube – Best for Waterproof Sealing in Your Car
If you have rubber gaskets that need to be bonded or weather stripping that needs to be bonded to metal surfaces, 3M Black Super Weatherstrip Adhesive will do the job right the first time. You can use it right out of the tube and it cures fast. The black color matches most gaskets and weatherstripping.
3M has worked for decades to develop the advanced adhesives seen today such as 3M 08008 Black Super Weatherstrip Adhesive Tube. It allows you to maintain your vehicles properly and keep them looking like new.
Pros and Cons
It works on plastic window rain guards, motorhome front windshields, and the anti-vibration pad on a washing machine plastic foot.
For decades, 3M Black Super Weatherstrip Adhesive has been preferred for repairing a wide variety of rubber sealant issues in vehicles by auto professionals.
2. Boot-Fix Shoe Glue: Instant Professional Grade Shoe Repair Glue – Specifically Formulated for the Shoe Repair Industry
Boot-Fix Shoe Glue works on most types of shoe material. It stands out from other shoe repair glue because it remains flexible and does not crack apart when you start wearing the shoe. Boot-Fix Shoe Glue does not require clamping for most repairs and will hold in the high temperatures of summer or freezing winters and rain. The glue bonds well on work boots, rubber-soled dress shoes, athletic sneakers and much more types of shoes.
When you apply it, it is recommended not to use latex gloves, but to use your bare hands. A small piece of the rubber glove could accidentally be bonded to your shoe. If some glue gets on your hands, you can rub it with cooking oil to release the bond. Just clean and dry the area to be repaired. Then add a small drop of glue and press the sides together for less than a minute. After you make sure the cap clicks shut, you can store the glue in the refrigerator for longest shelf life.
You can also read our TOP8 of Shoe Glues.
Pros and Cons
On porous material, it may take several applications before the glue holds because the material will absorb the glue until it is saturated at which time it will hold. This is one reason why it doesn’t hold the first time in some shoes.
Boot-Fix Shoe Glue is recommended by shoe repairmen who have used it for years to repair heavy-duty work boots, tennis shoes, sandals and high heels even when the sole has become completely detached. The main reason professionals prefer this glue over other so-called super glues is because it dries flexible. Most other glues dry brittle and crack after the boots are worn.
3. Gorilla Super Glue Gel, 15 g – Super Strong for a Variety of Surfaces
Gorilla Super Glue Gel is specially formulated to absorb impacts, drops, and shocks as it contains tiny rubber particles that increase its strength and impact resistance. Works well for bonding rubber as well as plastic, metal, wood, ceramic, leather, paper and other materials. The thicker formula is easier to control and suitable for vertical surfaces.
Gorilla may be ideal for gluing glass to glass, but only a few droplets need to be used because it will spread more on two smooth surfaces. It may even be suitable for hanging blinds and curtain rods if they are small and don’t carry too much weight. This glue is resistant to heat and cold, so can be used to repair outdoor furniture. Gorilla will withstand rain The glue needs to be used according to instructions. Only a small amount is required for most applications. It will dry quickly and may take a day to cure.
Is Gorilla glue waterproof?
According to the technical specs, that type of Gorilla Super Glue is not for outdoor using (and there is no specific info about waterproofing). But some customers said that it is water resistant.
Pros and Cons
Gorilla Super Glue Gel is highly versatile and works well for most household purposes.
4. GlueMasters Instant Glue – Industrial-strength Glue for the Consumer Market
Glue Master Instant Glue Thin Viscosity offers one of the strongest bonds on the market today. It cures quickly and dries in 15 seconds or less. Glue is suitable for plastic models and holds delicate parts on model planes, boats, and trains. It is also suitable for gluing beads and stones for creating jewelry. Household uses include repairing rubber window stripping, gaskets, glass, china, and wood. It is easy to use and offers enough strength for large or small jobs.
The cap should be replaced after use. You can squeeze the bottle when it is vertical to blow out any excess glue in the nozzle then wipe the top and replace the cap. It should not harden. Some people recommend keeping it in the refrigerator to prevent drying.
It comes with a satisfaction guarantee, so if you aren’t happy, you can return the bottle and get a refund within 60 days.
Pros and Cons
If you are looking for an all-around glue for multiple projects including hobby and craft projects, Glue Master Instant Glue (2 OZ Thin Viscosity) may be your best option.
5. GOAT TUFF HIGH-PERFORMANCE GLUE – Premium Archery Glue
Goat Tuff High-Performance Glue is formulated to work with rubber, wood, metal, leather, and plastic. It is thicker than many other supertypes of glue so it is easier to use and only a small amount of glue bonds quickly. Goat Tuff is the go-to glue for arrow making and repairing, but is also suitable for many household repairs including rubber weatherproofing, broken china, leather shoes and other leather products and wooden furniture. It contains no solvents and is nonflammable.
When using Goat Tuff, you need to make sure both areas to be glued are clean. The bottle should be stored in a cool place away from direct sunlight, but not refrigerated. To maintain viscosity, the nozzle should be cleared of excess glue and the bottle should sit in a vertical position for two to three minutes before the cap is replaced.
Pros and Cons
Goat Tuff High-Performance Glue holds inserts into graphite, aluminum or carbon shafts and broadheads onto aluminum ferrules and vanes. It holds feathers to carbon or aluminum arrows. It will also hold feathers, nocks, and points to wood arrows.
6. Gear Aid Freesole Urethane Formula – To Extend the Life of Your Footwear
An excellent glue for repairing separated soles or rebuilding worn heel and toe areas. The formula was created to withstand temperatures up to 200 degrees F and as low as -20 degrees F. It is useful for bonding rubber as well as athletic shoes, climbing boots, hiking boots, cycling shoes and more. It increases shock absorption as well as a tread to actually upgrade the shoe. Since it dries clear, it is suitable for any color shoe.
For some damage, especially on the bottom of the shoe, several applications are required to get the desired result because the depression in the damaged area needs to be filled. However, the second layer may be stronger than the original sole.
Gear Aid Freesole Urethane Formula Shoe Repair may repair splits in solid rubber climbing boots as well as other shoes. For major repairs, two tubes may be better so you have one for each boot.
Pros and Cons
Gear Aid Freesole Urethane Formula Shoe Repair is a good glue for repairing rubber soles and other types of footwear. It provides a strong and long-lasting bond.
7. Starbond KBL-500 – Industrial Grade Bonding and Filling Adhesive
The Starbond KBL-500 product is black-colored a flexible adhesive for the rubber to metal or other material that focuses on shock absorbance and impact protection. It is excellent for hiding imperfections in footwear and other items that have been damaged. The viscosity is like syrup, so it may take up to one minute to dry. It can be sanded and polished and is ideal for heavy-duty bonding and malleable material. It is very resistant to weathering especially humidity and heat.
If the bonding time is too long because of the added rubber-toughened compound that gives it the black color, you can add an accelerator that is made especially for this purpose. Starbond KBL-500 is used for accenting designs on wood, bonding different materials such as glass, wood, metal, and rubber, gluing R/C car tires, and in speaker manufacturing. It is also useful for repairing and filling cracks, voids, inclusions, and knots in the wood.
Pros and Cons
The adhesive works well with or without the accelerator, and it is an excellent filler for imperfections.
8. Hero Glue – Extra Strong and Fast Bonding it Is Useful for a Wide Variety of Materials
Hero Glue Premium Instant CA Glue is manufactured with a triple distilling process that increases bonding ability to be higher than other brands. It is thin viscosity for three-second drying. It creates an excellent bond on tight-fitting joints for most materials. You receive extra supplies including two applicator caps and nozzles as well as five extra tips for precision application in hard to reach places. There are two nitrile gloves to help protect your fingers from the extremely quick bond.
For best results, each surface should be free from rust, oil, dust, and debris. When cutting open the top, it should be pointed away from your eyes and held upright. Only a small quantity is needed on the bonding surface. To extend the glue’s shelf life, it should be kept in a cool, dry place. Refrigeration will help extend the shelf life.
Pros and Cons
Hero Glue is manufactured to be give an extra strong bond for a wide variety of materials and applications such as airplane models, archery, jewelry repairs, auto body repairs, shoe repairs, hardware restoration and marble and granite repairs.
9. Bob Smith Industries BSI-117H Black IC-2000 – Extra Strong Rubber Toughened Super Glue
Bob Smith Industries BSI-117H Black IC-2000 is an extra thick glue that bonds in 10 – 25 seconds but full strength is reached in about three hours. It offers a semi-flexible bond that is suitable for plastics, composites, metal, glass, and rubber. One of the strongest instant glues for non-porous surfaces. This glue has enhanced shock resistance and quick bonding which makes it especially good for bonding rubber components. Often found in speaker repair shops and golf pro shops and is also used for carbon composites in the aerospace industry.
The glue is also used to bond metals together, fiberglass, carbon-fiber and other advanced materials. It has many marine uses such as bonding bulkheads, servo rails, and usage inside fiberglass hulls and fuselages. It is pliable enough to be easy to carve with a hobby knife and is a good adhesive for R/C car tires. To get the maximum strength, it should not be used with an accelerator. The shelf life can be extended if you store it in the refrigerator.
Pros and Cons
Bob Smith Industries BSI-117H Black IC-2000 is toughened by rubber particles and considered to make the strongest bond for an extensive assortment of materials.
10. Starbond KBL-50 Flexible Black Thin – A Premium Super Glue Expands and Contracts With the Environment Preventing Cracking
Starbond KBL-50 Flexible Black Thin is a rubber-toughened glue that is suitable for the soft material. It fills fractures and pores in the material and remains malleable when it dries. It will expand and contract with wear and temperature changes and not crack. You get extra supplies with each bottle including two applicator caps and a clog-free stopper. There is a bag of micro tips that make it easy to apply the glue in tiny spaces. The glue is also suitable for hiding imperfections because it fills dark holes and can be used to highlight specific areas of a craft or other project.
If the glue is stored properly it maintains its quality for 20 months. There is a warranty that promises to replace your bottle for free if it doesn’t last for the stipulated time. Colored CAs take longer to bond because of the added rubber content and large volumes of glue take longer. When you need quick drying for large projects you can use the Starbond accelerator. It will bond dissimilar materials such as rubber, metal, glass or wood. It bonds stones and beads to metals in jewelry making. The glue is also useful for repairing speakers, voice coils and attaching top plates to the frame.
Pros and Cons
Starbond KBL-50 creates a strong and supple bond that can be sanded and polished to a high gloss. It offers shock and impact absorbance and the dark color is ideal for hiding and filling scrapes and other defects.
While metal to rubber bonding may be the most popular especially in the automotive, aeronautic and marine industries, there are many types of glue and adhesives that bond rubber to a wide range of other materials. These adhesives are designed and tested to meet the exact requirements to comply with industrial and commercial regulations.
The latest adhesive technology may replace ultrasonic welding, mechanical fasteners, and solvent bonding techniques. The glues and adhesives of today help save you time and money by enabling you to repair your shoes, speakers, microphones and other items to make them last longer and look like new.